User Guide, Elektronika i Telekomunikacja, z PENDRIVE, Politechnika - EiT, 2011 2012 - sem 2, METROLOGIA ELEKTRYCZNA ...

[ Pobierz całość w formacie PDF ]
User’s Guide
RIGOL
Publication number UGA07108-1110
Feb. 2009
DS1000E, DS1000D Series
Digital Oscilloscopes
DS1102E, DS1052E, DS1102D, DS1052D
© 2008 RIGOL Technologies, Inc. All Rights Reserved
 RIGOL
© 2008 RIGOL Technologies, Inc. All Rights Reserved


RIGOL products are protected by patent law in and outside of P.R. China.
Information in this publication replaces all previously corresponding material.

RIGOL Technologies, Inc. reserves the right to modify or change part of or all
the specifications and pricing policies at company’s sole decision.

NOTE:
RIGOL
is registered trademark of
RIGOL
Technologies, Inc.
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
I
 RIGOL
Safety Notices
Review the following safety precautions carefully before operating the instrument to
avoid any personal injuries or damages to the instrument and any products
connected to it. To avoid potential hazards use the instrument as specified by this
user’s guide only.
The instrument should be serviced by qualified personnel only.
Avoid Fire or Personal Injury.
Use Proper Power Cord.
Use the power cord designed for the instrument and
authorized in your country only.
Connect and Disconnect Accessories.
Do not connect or disconnect probes or
test leads while they are connected to a voltage source.
Ground The Instrument.
The oscilloscope is grounded through the grounding
conductor of the power cord. To avoid electric shock the instrument grounding
conductor(s) must be grounded properly. Before making connections to the input or
output terminals of the instrument.
Connect The Probe.
The probes’ ground terminals are at the same voltage level of
the instrument ground. Do not connect the ground terminals to a high voltage.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings
and marks on the instrument. Follow the user’s guide for further ratings information
before making connections to the instrument.
Do Not Operate Without Covers.
Do not operate the instrument with covers or
panels removed.
Use Proper Fuse.
Use the fuse of the type, voltage and current ratings as specified
for the instrument.
Avoid Circuit or Wire Exposure.
Do not touch exposed connections and
components when power is on.
Do Not Operate With Suspected Failures.
If suspected damage occurs with the
instrument, have it inspected by qualified service personnel before further
operations.
Provide Proper Ventilation.
Refer to the installation instructions for proper
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
II
 RIGOL
ventilation of the instrument.
Do not operate in wet/damp conditions
Do not operate in an explosive atmosphere
Keep product surfaces clean and dry
The disturbance test of all the models meet the limit values of A in the
standard of EN 61326: 1997+A1+A2+A3, but can’t meet the limit values
of B.
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000E, DS1000D Series
III
  [ Pobierz całość w formacie PDF ]

  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • emaginacja.xlx.pl

    •